“Taifun GTR“
With the Taifun® GTR we rely on proven concepts and combine them with new aspects to meet the needs of the users. Despite its low overall height, the Taifun® GTR has a top fill system, liquid control and variable air flow control.
Behind the inconspicuous look of the Taifun® GTR are some unusual solutions for well-known functions.
The TopCap completely dispenses with a thread for a Taifun® vaporizer. The new quick release is extremely robust and user-friendly. The tank can be opened and closed with just a minimal turn without missing a high-quality impression in the slightest.
FUTURE-PROOF MATERIALS
With regard to DIN CENTS 17287, we were looking for an alternative to the well-known transparent plastic tanks and glass, with success.
For the first time, the Taifun® GTR will be delivered with a plastic tank again. The material used, polysulfone (PSU), is a transparent plastic that is one of the high-temperature-resistant high-performance thermoplastics. In a temperature range of -100 ° C to 190 ° C, the tank is hard and its ignition temperature (caused by a flame) is just under 500 ° C. In addition, it has an extremely high chemical resistance and has survived all previous tests with the known “tank crackers” without any damage or stress cracks.
INNOVATIVE AIRFLOWCONTROL
The Taifun® GTR has two separate air channels. In the basic version, the cross-sections of the channels are 1.0mm and 1.2mm. With the AFC ball-supported either both channels can be opened completely or half individually, as well as together completely or half.
The AFC ring of the Taifun® GTR has a stop in both directions. However, the intelligent arrangement of the air holes does not lead to a setting from small to large. The adjustment path is kept as short as possible and the outer opening is only ever exposed, halved or closed with a click to the right or left (depending on the selected air hole). In order to save overall height, the corrugated AFC ring also serves to assemble / disassemble the evaporator.
The possibilities of the AFC allow a wider range in the restrictive steam area without much effort. Both fans of the classic, very strict MTL and supporters of the very restrictive DL steaming can adjust the air supply to their personal needs without having to accept compression losses under the winding.
VARIABLE LIQUID CONTROL OF THE NEXT GENERATION
The Taifun® GTR is designed for versatile use in the restrictive area. This reflects the new arrangement of the Liquidcontrol.
One user vaporizes less viscous liquids with less power and higher negative pressure and the other more viscous liquids with more power and more air.
To meet these requirements, a liquid control is required which can be adapted to the individual requirements of the users to a certain extent. Simply turning it up is not enough for a satisfying steam experience in the area of MTL and restrictive DL.
The left liquid channel is optimized for 50/50 liquids with restrained performance and greater negative pressure in the chamber. Due to the narrower and higher riser, the chamber is also not flooded under the aforementioned conditions.
The right channel is suitable for 70/30 + liquids with increased performance due to its wider milling and lower rise height. With a longer train duration, both channels can also be opened here. The Liquid Control is set by turning the tank easily and simply. 4 recesses for the accesses on both sides allow a very short rotation in the circumference, no matter where the thread starts.
KEEP IT SIMPLE
The wrapping deck of the Taifun® GTR is the logical continuation of the “Taifun Deck” introduced with the GT IV. The wire receptacles correspond to those of the Taifun® BTD with the improved lugs for easier wire reception.
The 2-sided ventilation introduced with the Taifun® GT IV was also adapted to the requirements of a purebred restrictive evaporator. Both air ducts emerge slightly obliquely under the winding and allow the coil to be adjusted to the needs of the user in terms of taste and “flash”.
In principle, “keep it simple” also applies to the Taifun® GTR. The deck does not require great wrapping skills or cotton laying techniques for an optimal vaping experience. Simply install the coil, pull the cotton wool through and put it in your pocket. Finished.
PRODUCT INFO TAIFUN® GTR
Technical specifications
Diameter 23mm
Height 40mm (without DripTip with 510 connection)
510 DripTip
Stainless steel 1.4301, PEEK, PSU
adjustable AFC over 2 holes with 1.0mm and 1.2mm
Included
Taifun® GTR RTA
510 DripTip
Spare parts bag
operation manual
Quick Shipping and Professional Packaging
We provide a variety of shipping options owing to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse personnel is highly-skilled and will package your items in accordance with our exact and precise specifications. Your items will undergo an exhaustive inspection and adequately secured before being delivered. Everyday, we send to thousands of customers in different countries. This shows our commitment to be the largest retailer online in the world. Both Europe as well as the USA have distribution and warehouse centres.
Note: Orders that contain more than one item are assigned a processing period depending on the item.
Prior to shipping We will conduct a thorough inspection of the items you've purchased. Today, the majority orders will be shipped within 48 hours. The delivery estimate is 3 to 7 days.
Returns
The stock market is always changing. It is not managed entirely by us since we have multiple organizations, such as the factory and the storage. The actual stock can be changed at any time. It's possible that your order will be unable to fill once you've placed your order.
Our policy is valid for 30 days. If you have passed 30 days by since your purchase, unfortunately we can't offer an exchange or refund.
Your item should be in the original packaging and not be used. The item must be in its original packaging.
Related products
Pod Systems
Pod Systems
Atomizer
Atomizer
Pod Systems
Atomizer
Atomizer
Atomizer
Atomizer
Atomizer
Atomizer
